Protocol support, Iso 18000-6c (gen2), Protocol configuration options – ThingMagic M6e User Manual
Page 50: Protocol configuration options 50
Protocol Support
A D I V I S I O N O F T R I M B L E
50
Functionality of the Mercury6e
Protocol Support
The M6e has the ability to support many different tag protocols. Using the MercuryAPI
ReadPlan classes the M6e can be configured to single or multi-protocol Read operations.
The current protocols supported are (some may require a license to enable):
ISO 18000-6C (Gen2)
Protocol Configuration Options
The M6e supports multiple ISO-18000-6C profiles including the ability to specify the Link
Frequency, encoding schemes, Tari value and modulation scheme. The protocol options
are set in the MercuryAPI Reader Configuration Parameters (/reader/gen2/*). The
following table shows the supported combinations:
Note
It is important that the /reader/baudRate is greater than /reader/
gen2/BLF
, in equivalent frequency units. If its not then the reader could be
ISO-18000-6C Protocol Options
Backscatter
Link Frequency
(kHz)
Encoding
Tari
(usec)
Modulation
Scheme
Notes
250
Miller (M=8)
12.5
PR-ASK
250
Miller (M=4)
12.5
PR-ASK
250
Miller (M=2)
12.5
PR-ASK
250
FM0
12.5
PR-ASK
250
Miller (M=8)
25
PR-ASK
250
Miller (M=4)
25
PR-ASK
Default
250
Miller (M=2)
25
PR-ASK
250
FM0
25
PR-ASK
250
Miller (M=8)
25
PR-ASK
640
FM0
6.25
PR-ASK
Not supported in PRC
Region