Smart Power Systems HR-30 (3-Phase) User Manual
Page 20
Smart Power
®
Systems
A. C. MODULAR GENERATOR SYSTEM
Page 19 of 52
HR-30 tray assembly disassembled into base tray assembly (with diamond plate
cover added), cooler/fan enclosure and reservoir
Figure 9
6.
Mount Command & Control Center:
a. Create hole pattern as shown in Figure 10.
b. Mount Command & Control Center to vehicle using #10 stainless steel
fasteners.
c. Connect Command & Control Center to system controller unit using p/n
3722004 harness.