SINGER SEQS-6000 FUTURA QUARTET Instruction Manual - Manual (Page 50)

48
HELPFUL MESSAGES WHEN EMBROIDERING
Display on control panel Situation
Embroidery unit is mounted, but USB cable is not connected.
LED lamps are lit as ”P”and ”C” alternately.
USB cable is connected, but embroidery data is not transferred yet.
All LED lamps are turned off.
Embroidery data is being transferred.
All LEDlamps are turned off.
Just after the embroidery data was completely transferred (before starting to sew
the first block).
LED lamps turn on according to transferred block numbers. (16 blocks in this
example).
Embroidery in progress
Completed and transferred block numbers are shown. This sample means 16
blocks are transferred and 3 blocks are completed. (Now block 4 is in progress.)
When last block or one unit of endless hoop is completed.
All LED lamps are turned off.
USB cable is disconnected while being suspended (Embroidery is still available)
LED lamps are lit as ”P”and ”C” alternately for about 2 seconds, and back to normal
display.