SINGER SEQS-6000 FUTURA QUARTET Instruction Manual - Manual (Page 37)

35
When embroidering onto fabric which is smaller than
the hoop size, or when embroidering close to the
edge of the fabric, attach the stabilizer as illustrated.
WHEN EMBROIDERING A NARROW PIECE OF
FABRIC SUCH AS RIBBON TAPE
 Always use a layer of stabilizer which is bigger than the
hoop being used. (The stabilizer will not work properly
unless it is clamped in the hoop along with the fabric being
embroidered.)
 Stabilizer can usually be obtained from a fabric store.
Stabilizer is available in several different types, from thin
to thick. Purchase whichever type suits your embroidering
needs. It is generally recommended that the weight of the
stabilizer be similar to that of the fabric.
WHEN EMBROIDERING ALONG THE EDGE OF
FABRIC SUCH AS A HANDKERCHIEF
Embroidery surface at fabric edge
Stabilizer
(Adhesive surface facing)
Stabilizer
Hoop inner frame
Ribbon tape
Stabilizer
Hoop inner frame