Reliance Controls 3006HDK - Manual (Page 12)

Page 11
TRANSFER SWITCH PRODUCT SPECIFICATIONS
Maximum Watts 7500
Possible Single Pole/Double Pole Combinations 0-1 DP / 4-6 SP
Maximum Combined Load @ 125 Volts AC (Amps) 60 Amps
Maximum Combined Load @ 250 Volts AC (Amps) 30 Amps
Maximum Load per Circuit from Generator (Amps) (2) 20, (4) 15
Maximum Load per circuit from Load Center (Amps) 20
Recommended Building Wire Size (runs less than 100’) 10 Gauge with ground
Wattmeters Yes
Number of Knockouts Available 1/2" or 3/4" 6
Power Inlet Box Match PB30
Cabinet Dimensions H x W x D (inches) 7 1/2" x 7" x 4 1/2"
Cabinet Type (NEMA) 1
TRANSFER SWITCH ACCESSORIES AVAILABLE
FROM RELIANCE CONTROLS
These additional products are available through your local distributor.
Call Reliance Controls at (800) 634-6155 to locate the distributor nearest you.
Power Cords
Connect generator power outlets with outdoor power inlet boxes or accessory power inlets
PC2010 10-foot cord with L14-20P and 14-20R twist lock ends
PC2020 20-foot cord with L14-20P and 14-20R twist lock ends
PC3010 10-foot cord with L14-30P and 14-30R twist lock ends
PC3020 20-foot cord with L14-30P and 14-30R twist lock ends
Transfer Switch Accessory Power Inlets
Insert into faceplate of transfer switch wiring compartment to allow plug-in of power cords
directly to transfer switches
L1420F 20 Amp power inlet
L1430F 30 Amp power inlet
Flush-Mount Kit
Use with Reliance surface-mount transfer switch (supplied in kit) to convert to a
flush-mount installation
KF6 For 6-Circuit Transfer Switch
Power Cords
Accessory
Power Inlets
Flush Mount Kit