QOMO QPC60 - Manual (Page 23)

21
Connect to a microscope
Connect to a microscope enables you to examine microscopic objects on a big screen.
1. Adjust the microscope and focus objects.
2. Choose an appropriate micoscope adapter.
3. Microscope adapter accessaries are applicable to Ø28mm ,Ø31mm, Ø33mm, and Ø34mm
eyepieces.
For eyepieces of about Ø33mm, Ø34mm, only a microscope adaptor with Ø33 or Ø34mm
label should be installed.
For a Ø28mm eyepiece, insert the Ø28mm adapter into the Ø33 or Ø34mm adapter.
For a Ø31mm eyepiece, insert the Ø31mm adapter into the Ø33 or Ø34mm adapter.
4. Mount the microscope adapter onto the Lens.
5. Switch the focus mode to Macro.
Press MENU ( )--> select Focus ( ) -->
select Macro
or press Macro button (
)( ) on remote controller.
6. Connect the lens with microscope adapter to the
microscope.
If the image is not clear. Please adjust the focus of microcope.
Press the AF button (
) or use the manual focus button on remote control to fine-tune
the focus.
Functions indicated by can only be used by the remote control.
Ш33/Ш34mm
Ø31mm
Ш33/Ш34mm
Ø28mm
Ш33/Ш34mm