QOMO QPC60 - Manual (Page 16)

14
Connect to a computer
▶Connect via VGA cable
Use VGA cable to connect VGA IN connector on the product to the VGA OUT connector on the
computer.
▶Connect via USB
Press MENU ( ) button
→ select "USB Connect". Choose "Disk" to connect mass
storage. Choose "PC Cam" to be as a PC-Cam.
To display computer image, press PC button ( ) on the control panel.
For laptop to output display mode, use the keyboard command ( Fn + ) to swtich
between the display modes. For different command, please refer to your laptop manual.
The signal is only pass through from VAG IN port to VGA OUT port on document camera.
It cannot display computer image on 3” LCD panel. Please connect an output device to
display the image on computer.
USB SD CARD
AUDIO OUT MIC. IN
NTSC PAL
HDMI OUT
VIDEO OUT VGA IN VGA OUT
PASS THROUGH
DC IN(5V/2.5A)
RGB