QOMO QPC60 - Manual (Page 14)

12
▶Standard TV
• Connect via VGA OUTPUT
1. To display images, you can use VGA cable to connect to your television’s RGB port via the
VGA OUT connector.
2. Make sure the output switch is set for VGA mode and select an appropriate Aspect Ratio.
3. To output sound, you can simply use internal speaker, or connect a speaker to the AUDIO
OUT port.
• Connect via VIDEO OUTPUT
1. To display images, you can use VIDEO cable(yellow) to connect to the C-video in on your
television via the VIDEO OUT connector.
2. Make sure the output switch is set for VIDEO mode.
3. To output sound, use the AUDIO cable to connect to your television via the AUDIO OUT
connector a TV.
Please make sure to adjust TV SYSTEM(NTSC / PAL) switch setting.
NTSC:America, Taiwan, Panama, Canada, Chile, Japan, Korea and Mexico.
PAL:Europe, China and Hong Kong.
AUDIO OUT MIC. IN
NTSC PAL
HDMI OUT
VIDEO OUT VGA IN VGA OUT
PASS THROUGH
DC IN(5V/2.5A)
LINE IN
RGB
AUDIO OUT MIC. IN
NTSC PAL
HDMI OUT
VIDEO OUT VGA IN VGA OUT
PASS THROUGH
DC IN(5V/2.5A)
AV IN