Connect to a speaker system, Connect to an external microphone – QOMO QPC60 User Manual
Page 15
13
Connect to a speaker system
Plug a 3.5mm plug speaker to AUDIO OUT connector on the product. Only the audio from the
video playback is supported.
Connect to an external microphone
Plug a 3.5mm mono microphone to MIC. IN connector on the product.
The built-in microphone will be disabled when an external microphone is connected.
If HDMI OUT and AUDIO OUT are connected simultaneously, the audio from HDMI OUT
device will be disable but output from AUDIO OUT device.
Take caution when using earphones. Adjust the volume down to prevent hearing damage
due to loudness.
AUDIO OUT
MIC. IN
NTSC
PAL
HDMI OUT
VIDEO OUT
VGA IN
VGA OUT
PASS THROUGH
DC IN(5V/2.5A)
LINE IN
AUDIO OUT
MIC. IN
NTSC
PAL
HDMI OUT
VIDEO OUT
VGA IN
VGA OUT
PASS THROUGH
DC IN(5V/2.5A)