Oldcastle BuildingEnvelope FG-3000 - Manual (Page 15)

INSIDE GLAZE
SILL FLASHING INSTALLATION
1. ANCHORS DESIGNED TO TWIST IN.
2. SPACE ANCHORS MAX. 4" FROM
EACH SIDE OF MULLION.
3. BENT LEG ALWAYS TO EXTERIOR.
4. NOTE: STAKE ANCHORS TO PREVEN T
HORIZONTAL MOVEMENT.
ANCHORS MUST FACE EXTERIOR
AS SHOWN.
INTERIOR
A SHIM UNDER FLASHING
IS THE PREFERRED METHOD
FOR BEST THERMAL RESULTS.
FLASHING ANCHORS MUST
BE CAP SEALED.
SEALANT
FG-3217
FG-3000-FP-4
PART #: 7947
FG-3000-FP-3
PART #: 7948
FG-3000-FP-11
PART #: 7979
1/4" NOM.
SEAL WITH A NON-SKINNING,
NON-HARDENING SEALANT.
FILL BREAK IN FLASHING
AND UNDER SPLICE.
NOTE: SILL FLASHING
SHOULD BE LEVEL AND
MAKE SURE IT IS NOT TILTED
TOWARD THE INTERIOR.
FLASHING SPLICE
14 JULY 2011
Phone: 1-866-OLDCASTLE (653-2278)
Web Address: www.oldcastlebe.com
F L U S H G L A Z E S E R I E S 3 0 0 0 I N S T A L L A T I O N M A N U A L