Modern AG Super Highway Special - Manual (Page 68)

The dealer should…
Step 1. Bolt the A-frames (strut risers) (1) to the outside of the top angle (2)
using bolts (3), flat washers (3A), lockwashers) (4), and nuts (5). Do not tighten
until assembly is complete.
Step 2. Insert bolt (9) through into stiff-arm assemble with lockwasher (10) and
nut (11). Do not tighten until assembly is complete.
Step 3. Insert top bolt (7) through A-frame (1), through stiff-arm (8), through
pivot-flex (12) with spacer (13) inserted in middle of pivot-flex, (other side)
through stiff-arm (8), through A-frame (1), through flatwasher (13A) and apply
nut (14).
Step 4. Begin tightening assembly. Start with Step 2, Step 3, and then Step 1.
7' Predatorrr aSSeMBly
68 - Superrr Highway & 7' Predatorrr