Mercedes-Benz S-Class 2002 COMAND Manual - Manual (Page 168)

166 Destination input
Audio Telephone Navigation Index
Info Services and
system settings
Introduction
Altering the map scale
Display of the scale bar is activated by either one of two
actions:
• Press or
• Press the rotary/pushbutton .
8 Current map scale
9 Scale bar, 13 different scales are available from
0.05 mi/inch to 500 mi/inch
10 New scale
11 Square frames enlarged section of the map
Increase the map scale (activates more detailed map):
Press and turn the rotary/pushbutton to the
left. A square will appear around the cross-hairs, it
indicates the new map section.
Reduce the map scale (activates a less detailed map):
Press and turn the rotary/pushbutton to the
right. Press the rotary/pushbutton briefly to calculate
the new map section. This will take place automatically
after 8 seconds.
Note:
To select destinations which are not directly located in
the vicinity of the map section on the screen, it is
advisable to access the overview map. Then use the
number keys to position the cross hairs near the
destination. Now switch to the detail map and move the
cross hairs to your desired destination.
Confirming destination:
Once the cross hairs mark the desired destination,
press the rotary/pushbutton
longer than 2 seconds.
Then select the route calculation mode and calculate
your route, page 175.
P82.85-7739-26
11
10
8
8 9
09-NAVI1-25-US.pm5 09.07.2004, 14:27 Uhr 166