Mercedes-Benz S-Class 2004 COMAND Manual - Manual (Page 73)

64
Audio
DVD operation
ț From time to time, clean your DVDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.
ț After use, put your DVDs into the DVD
box.
ț Protect your DVDs from high
temperatures and direct sunlight.
̈ Load a video DVD into the COMAND
(
୴ page 65).
or
̈ If a DVD is already loaded, open the Au-
dio menu (
୴ page 30) and press the
DVD soft key.
If the video DVD meets the playback re-
quirements, playback will begin. If avai-
lable, the DVD menu (
୴ page 70) saved
on the DVD will appear.
DVD playback requirements
i
Vendors may offer DVDs which do not
comply with the standards.
Sound, picture and other playback
problems may occur when you play
such DVDs.
The COMAND can playback video
DVDs meeting the following
requirements:
ț Regional code is set (factory
setting)
ț NTSC or PAL TV standard
The appropriate information is usually
given either on the DVD or the DVD
box. The factory setting of the
COMAND is regional code 1. The
setting can be changed in a Mercedes-
Benz Service Center. This will allow you
to playback video DVDs with other
regional codes, as long as they comply
with the NTSC or PAL TV standard.
i
The COMAND system is capable of
playing DVDs. However, in order to
avoid driver distraction, the video
function is disabled and no images will
be shown on the COMAND screen.
Switching to DVD operation