Mercedes-Benz S-Class 2004 COMAND Manual - Manual (Page 144)

135
Navigation
Route guidance
Muting current voice instructions
̈ Press J.
The current announcement is stopped.
You will hear the next navigation
announcement normally.
Switching voice instructions On/Off
Switching off
̈ During a navigation announcement
press J for 2 seconds.
The message Voice Announcements
Muted will appear briefly.
Further route guidance takes place
using only the symbols in the display.
If a new route guidance cycle is started,
the announcements are automatically
switched on again.
Switching on again
̈ Press j.
The navigation displays are only visible
while route guidance is active.
To switch to the navigation display from
another display, e.g. from CD operation:
̈ Press b or c.
Two examples are shown below:
Display example 1:
The road you are currently driving on is
shown on the status bar, in this case
I-90 .
The indication 120 mi is the distance to
the next driving maneuver.
If the GPS position display ( ୴ page 149) is
active, the GPS data are shown instead of
the street name.
Navigation displays
i
Using the control system, the display
unit can be changed between km or
miles (see your vehicle’s Operator’s
Manual).
ț When the display unit is set to
miles, the COMAND will indicate
distances in miles (mi) or feet (ft).
ț When the display unit is set to km,
the COMAND will indicate
distances in kilometers (km) or
meters (m).