Mercedes-Benz E-Class 2004 COMAND Manual User Manual
Page 97
96
Navigation*
Important notes
If your vehicle has been transported by a
car, train or ferry, COMAND may require
some time to find its exact position. Mov-
ing the vehicle a few yards is typically
enough to remedy the situation.
Travelling abroad
The navigation DVD covers the continental
U.S., Hawaii and Canada.
Contact your Mercedes-Benz Center or the
Customer Assistance Center in the U.S. at
1-800-FOR-MERCedes (1-800-367-6372)
or in Canada at 1-800-387-0100 for other
DVDs that may be available.
̈
Change the navigation DVD
(
୴
page 95).
The system may require some time to find
its exact location after the vehicle was
transported by a car, train or ferry. To rem-
edy the situation, proceed as follows:
̈
Switch COMAND ON.
̈
Call up the Navigation main menu
(
୴
page 98).
̈
Resume driving and press
%.
The display changes to map display.
Continue driving until the displayed po-
sition or the displayed road corre-
sponds to the present location. The
system now is correctly repositioned.
Route guidance after vehicle
transport
!
GPS (Global Positioning System) sig-
nals received make it possible to deter-
mine the current vehicle position.
Deviations from the actual position
may occur
ț
if the reception of GPS signals is
disturbed e. g. in parking garages
and tunnels
ț
if road conditions are bad
ț
depending on the vehicle’s condi-
tion
If the reception of the GPS signal is un-
available, you will have to manually en-
ter the current vehicle position
(
୴
page 96).
Determination of location after
vehicle transport
i
The navigation DVD must be loaded in
the navigation computer (
୴
page 95).