Mercedes-Benz E-Class 2004 COMAND Manual - Manual (Page 124)

123
Navigation*
During route guidance
̈ In the Info menu ( ୴ page 121), press
the Route soft key.
The route appears on the map.
̈ Press the List soft key.
The list of road/route sections remain-
ing appears.
The road currently travelled on appears
at the top.
̈ Press or to scroll through the
list.
Press the Page soft keys to scroll
through the list page by page.
The Detour function blocks a route seg-
ment ahead.
The length of this route segment can be
entered. The system then calculates a de-
tour route, if possible.
Activate function and setting length of
route segment to be blocked
̈ The soft key displays are shown
(
୴ page 121).
̈ Press the Detour soft key.
If the detour function has already been
activated, then you can change the
length of the route segment to be
blocked (
୴ page 124) or switch off the
function ( ୴ page 124).
If the function has not been activated,
the system gives you a full-screen map
and freezes the map and screen show-
ing the position of the vehicle. You can
now set the distance of the route seg-
ment to be blocked.
̈ Continue to press the soft key More or
Less until the desired distance for the
route segment to be blocked is set.
Displaying the route list
i
Depending on the distance to the des-
tination, it may take a few moments be-
fore the route list is completed.
The list is completed only when the
route calculation is completed. Dest.
is displayed before the last list entry.
Detour function
୴୴