Mercedes-Benz E-Class 2004 COMAND Manual - Manual (Page 74)

73
Telephone*
Telephone operation
̄ Telephone operation
Switching ON
The telephone* is switched ON automati-
cally when COMAND is activated. The mo-
bile phone must be readily inserted into
the cradle*.
If COMAND is switched ON, the switched
OFF telephone* can also be switched ON
manually:
̈ Press and hold for a few seconds
until the telephone* is switched ON.
The Telephone main menu appears
(
୴ page 77).
One of the following messages could also
appear:
ț Please insert phone
̈ Insert the mobile phone into the
cradle*.
ț Phone not installed
Your vehicle is not configured for cellu-
lar telephone operation.
ț Please insert SIM card
This message appears only when using
a GSM cell phone.
̈ Insert a SIM card ( ୴ Telephone Op-
eration Guide).
Switching OFF
̈ in the Telephone main menu
(
୴ page 77), press and hold for
longer than 2 seconds.
or
̈ Switch COMAND OFF ( ୴ page 28).
The telephone* switches OFF after a
one-minute delay. If a call is in progress
during this time, the telephone switch-
es OFF approx. one
minute after the
call is terminated.
Switching the phone ON/OFF
i
If a call is in progress (handsfree) you
cannot switch the COMAND OFF,
. is
disabled.