Mercedes-Benz CLK-Class 2007 Owners Manual - Manual (Page 220)

219
Controls in detail
Audio system
Direct frequency input
̈ Select desired waveband.
̈ Press * button.
̈ Enter desired frequency with buttons
1 to R.
Manual tuning
̈ Select desired waveband.
̈ Press S or T button for approx.
three seconds.
̈ Press button repeatedly until desired
frequency has been reached.
Step-by-step station tuning takes place
in ascending or descending order. Each
time the button is pressed, the radio
tunes further by 0.2 mHz. During man-
ual tuning, the radio is muted.
Automatic seek tuning
̈ Select desired waveband.
̈ Press S or T button briefly.
The radio will tune to the next highest
or next lowest receivable frequency.
Scan search
ț Starting scan search
̈ Select desired waveband.
̈ Press SC soft key.
SC will appear in the display. The ra-
dio briefly tunes in all receivable
stations on the waveband selected.
ț Ending scan search
̈ Press SC soft key or
S or T.
The station last played will be se-
lected and
SC disappears from the
display.
i You can only enter frequencies within the re-
spective waveband.
If a button is not pressed within four seconds,
the radio will return to the last station tuned.
i If no station is received after two
consecutive scans of the complete frequency
range, then the scan stops at the frequency from
which it began.