Combination switch – Mercedes-Benz S-Class 2007 User Manual
Page 347
346
Controls in detail
Lighting
Locator lighting and night security illu-
mination
Locator lighting and night security illumi-
nation are described in the COMAND vehi-
cle section under “Setting locator lighting”
(
page 221) and “Setting night security il-
lumination” (
Headlamp cleaning system
1 Headlamp washer button
̈
Switch on the ignition (
̈
Press button
1.
The headlamps are cleaned with a
high-pressure water jet.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(
Combination switch
1 High beam
2 High beam flasher
Switching on high beams
̈
Turn exterior lamp switch to
position
B or to *
̈
Push the combination switch in the
direction
1.
The high beam indicator
A on the
instrument cluster comes on.
i
The headlamps are automatically cleaned if,
at the same time,
ț
the engine is running
ț
the lights are switched on
ț
the windshield wipers have wiped the wind-
shield with washer fluid 15 times
When you switch off the ignition or press
button
1, the automatic function is reset and
will start counting the next time from the begin-
ning.