Mercedes-Benz S-Class 2007 - Manual (Page 255)

254
Control systems
Instrument cluster control system
̈ Press ( or & to select the
“Service” menu.
If conditions have occurred causing
status messages to be recorded, the
number of messages appears in the
multifunction display: “2 Messages”.
̈ Press % or $ to select the mes-
sage.
̈ Press # to confirm.
Checking tire inflation pressure
For information about checking tire infla-
tion pressure (
୴ page 511).
Activating Run Flat Indicator*
For information about activating Run Flat
Indicator (
୴ page 515).
Calling up the maintenance service in-
dicator display
For information about maintenance
(
୴ page 532).
Checking engine oil level (S 600)*
For information about checking engine oil
level (
୴ page 494).
Settings menu
In the “Settings” menu, you can:
ț switch the daytime driving lamps on or
off
ț switch the additional speedometer on
or off
ț switch the radar sensors* on or off.
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages ( ୴ page 557).
i See the “Practical hints” section for mal-
function and warning messages ( ୴ page 557).
i If you turn the SmartKey in the starter
switch to position 0 and then back to position 2,
all messages will be deleted from the message
memory.
i The menu overview can be found on
( ୴ page 243).
୴୴