Mercedes-Benz C-Class 2008 Owners Manual - Manual (Page 255)

254
Controls in detail
Dual-zone automatic climate control
Adjusting air distribution
Use button Z ( ୴ page 250) to adjust
the air distribution manually. The following
symbols are shown in display
b:
̈ Press button Z ( ୴ page 250) re-
peatedly until you have select the de-
sired setting and the corresponding
symbol is shown in display
b.
The indicator lamp in button U goes
out. The automatic air distribution is
switched off. The air distribution is
controlled according to the selected
control setting.
Adjusting air volume
Seven blower speeds are available.
̈ Press button · to decrease
or Q ( ୴ page 250) to increase air
volume to the desired level.
The indicator lamp in button U
( ୴ page 250) goes out.
The air volume is adjusted correspond-
ing to the set blower speed. The auto-
matic air distribution remains switched
on.
Using driver-side settings for all tem-
perature zones (Canada only)
You can use the settings of the driver’s
side, such as temperature, air volume and
air distribution, for all temperature zones.
̈ Activating: Press button z
( ୴ page 250).
The indicator lamp in the button comes
on.
The driver-side settings are used for all
temperature zones.
̈ Deactivating: Press button z
( ୴ page 250) again.
The indicator lamp in the button goes
out.
Symbol Function
{ Directs air to the windshield
and the side defroster vents
a Directs air through the center,
side and rear passenger
compartment air vents
Y Directs air to the footwells
i You can also select a position between two
symbols with button Z.