Mercedes-Benz C-Class 2008 Owners Manual User Manual
Page 154
153
Controls in detail
Control system
Depending on the selected menu
(
page 155), pressing the buttons on the
multifunction steering wheel will alter what
is shown in the multifunction display.
The information available in the multifunc-
tion display is arranged in menus, each
containing a number of functions or sub-
menus.
The individual functions are then found
within the relevant menu (radio or CD op-
erations under
Audio
, for example). These
functions serve to call up relevant informa-
tion or to customize the settings for your
vehicle.
In the
Settings
menu, instead of functions
you will find a number of submenus for
calling up and changing settings. For
instructions on using these submenus, see
“Submenus in the Settings menu”
(
It is helpful to think of the menus, and the
functions within each menu, as being
arranged in a circular pattern.
The number of menus available in the sys-
tem depends on which optional equipment
is installed in your vehicle.
Using the control system
̈
To select a menu:
Press button
( or &.
̈
To select a submenu:
Press button
% or $.
̈
To go to the next higher menu level:
Press button
L.
̈
To select the standard display: Press
button
L repeatedly until the stan-
dard display featuring the odometer
and speedometer appears.
or
̈
Press and hold button
L until the
standard display featuring the odome-
ter and speedometer appears.
̈
To confirm selection:
Press button
#.
̈
To confirm display message:
Press button
# or L.
The control system saves certain dis-
play messages. Calling up display mes-
sages (
For information about warning and mal-
function messages appearing in the multi-
function display (
i
The headings used in the menus table are
designed to facilitate navigation within the sys-
tem and are not necessarily identical to those
shown in the control system displays.
The first function displayed in each menu will au-
tomatically show you which part of the system
you are in.