Mercedes-Benz C-Class 2008 Owners Manual - Manual (Page 171)

170
Controls in detail
Control system
Time/date submenu
Access the Time/date submenu via the
Settings menu. Use the Time/Date
submenu to change the instrument cluster
display settings.
The following functions are available:
Set the time
This function is not available if your vehicle
is equipped with the COMAND* system
and navigation module*.
̈ Press % or $ to select the
Instr. Cluster submenu.
̈ Press #.
̈ Press % or $ to select the
Time/date function.
̈ Press #.
̈ Press % or $ to select the Time
function.
̈ Press #.
The current time appears in the multi-
function display.
̈ To set a new time press # again.
̈ Press button ( or & to select
the setting you wish to change: hours
or minutes.
̈ Press button % or $ to change
the setting which is highlighted.
̈ Press # to store the entry.
Set the date
This function is not available if your vehicle
is equipped with the COMAND* system
and navigation module*.
̈ Press % or $ to select the
Instr. Cluster submenu.
̈ Press #.
̈ Press % or $ to select the
Time/date function.
̈ Press #.
Function Page
Set the time (hours) 170
Set the time (minutes) 170
Set the date (month) 170
Set the date (day) 170
Set the date (year) 170
i Vehicles with COMAND*:
For information on setting the time, refer to the
separate COMAND operating instructions.
i Vehicles with COMAND*:
For information on setting the date, refer to the
separate COMAND operating instructions.