Climate control system:automatic mode, Temperature:interior temperature – Mercedes-Benz C-Class 2008 Owners Manual User Manual
Page 254
253
Controls in detail
Dual-zone automatic climate control
Operating the climate control system
in automatic mode
̈
Activating: Press button
page 250) while the engine is run-
ning.
The indicator lamp in the button comes
on. The air volume and air distribution
are adjusted automatically.
̈
Use temperature controls
1 and 6
page 250) to separately adjust the
air temperature on each side of the
passenger compartment.
The temperature of the vehicle interior
is adjusted automatically.
̈
Deactivating: Press button
U
The indicator lamp in the button goes
out. The automatic operation of air vol-
ume and air distribution switches off.
The symbols of air distribution and air
volume appear in display
b.
̈
Adjust air distribution (
̈
Adjust air volume (
Setting the temperature
Use temperature controls
1 and 6
page 250) to separately adjust the air
temperature on each side of the passenger
compartment. You should raise or lower
the temperature setting in small incre-
ments, preferably starting at 72°F (22°C).
The climate control will adjust to the set
temperature as fast as possible.
̈
Increasing: Turn temperature
control
1 and/or 6 (
slightly clockwise.
The climate control system will corre-
spondingly adjust the interior air tem-
perature.
̈
Decreasing: Turn temperature
control
1 and/or 6 (
slightly counterclockwise.
The climate control system will corre-
spondingly adjust the interior air tem-
perature.
i
When operating the climate control system
in automatic mode, you will only rarely need to
adjust the temperature, air volume and air distri-
bution.
In automatic mode, cooling with dehumidify is
switched on. This function can be switched off if
necessary (