Mercedes-Benz C-Class 2008 Owners Manual - Manual (Page 166)

165
Controls in detail
Control system
̈ Press ( or & to select the
Service menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
1 Number of messages
̈ Press % or $ to select the mes-
sage.
̈ Press # to confirm.
The stored messages will now be
displayed in the order in which they
have occurred.
̈ Use % or $ to scroll through the
messages.
Checking tire inflation pressure
For information about checking tire infla-
tion pressure (
୴ page 339).
Activating Run Flat Indicator
(Canada only)
For information about activating Run Flat
Indicator (
୴ page 342).
Calling up the maintenance service
indicator display
For information about calling up the main-
tenance service indicator display
(
୴ page 362).
Settings menu
In the Settings menu there are two
functions:
ț The function Reset to factory
settings , with which you can reset all
the settings to the original factory
settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
i See the “Practical hints” section for mal-
function and warning messages ( ୴ page 387).
i If you turn the SmartKey in the starter
switch to position 0 and then back to position 2,
all messages will be deleted from the message
memory.