Floormats – Mercedes-Benz CLS-Class 2008 Owners Manual User Manual
Page 253
252
Controls in detail
Useful features
Switching off
̈
Turn switch at the tip of stalk in direc-
tion of arrow
2.
The heated steering wheel is switched
off. Indicator lamp
3 goes out.
For information on steering wheel, see
“Multifunction steering wheel”
(
Floormats
1 Retainer pins
2 Eyelets
Removing
̈
Pull floormats off of retainer pins
1.
̈
Remove the floormats.
Installing
̈
Lay down the floormat.
̈
Press the floormat eyelets
2 onto re-
tainer pins
1.
i
Indicator lamp
3 flashes or goes out
ț
in case of power surge or undervoltage
ț
in case of a steering wheel heating malfunc-
tion
i
The steering wheel heating switches off au-
tomatically when you remove the SmartKey from
the starter switch or, on vehicles with
KEYLESS-GO*, when you switch off the ignition
(
page 61) and open the driver’s door.
Warning!
G
Whenever you are using floormats, make
sure there is enough clearance and that the
floormats are securely fastened.
Floormats should always be securely fas-
tened using eyelets
2 and retainer pins 1.
Before driving off, check that the floormats
are securely in place and adjust them if nec-
essary. A loose floormat could slip and
hinder proper functioning of the pedals.
Do not place several floormats on top of
each other as this may impair pedal
movement.
i
To install or remove the floormat more easi-
ly, move the driver’s seat or front passenger seat
as far to the rear as possible (