Mercedes-Benz CLS-Class 2008 Owners Manual - Manual (Page 154)

153
Controls in detail
Control system
̈ Press button è or ÿ repeatedly
until the Settings menu is seen in the
multifunction display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset button ( ୴ page 136) for
approximately 3 seconds.
In the multifunction display you will see
the request to press the reset button
again to confirm.
̈ Press the reset button again.
The functions of all the submenus will
reset to factory settings.
Submenus in the Settings menu
̈ Press button j.
In the multifunction display the collec-
tion of the submenus appears.
̈ Press button ç.
The selection marker moves to the next
submenu.
The submenus are arranged by hierarchy.
Scroll down with the
ç button, scroll up
with the æ button.
With the selection marker on the desired
submenu, use the
j button to access
the individual functions within that sub-
menu. Once within the submenu, you can
use the button
j to move to the next
function or the button k to move to the
previous function within that submenu.
The settings themselves are made with
button
æ or ç.
i The settings you have changed will not be re-
set unless you confirm the action by pressing the
reset button a second time. After approximately
5 seconds, the
Settings menu reappears in
the multifunction display.
For safety reasons, the Headlamp Mode func-
tion in the Lighting submenu is not reset
while driving.