Mercedes-Benz CLS-Class 2008 Owners Manual - Manual (Page 107)

106
Controls in detail
Locking and unlocking
ț Remember that the engine can be
started by anyone with a SmartKey
with KEYLESS-GO that is left inside the
vehicle.
Possibility 1: (One SmartKey with
KEYLESS-GO in the vehicle, one
SmartKey with KEYLESS-GO outside
the vehicle):
If you leave the SmartKey with
KEYLESS-GO behind when exiting and
locking the vehicle, no message
appears in the multifunction display.
Possibility 2: (One SmartKey with
KEYLESS-GO in the vehicle, no
SmartKey with KEYLESS-GO outside
the vehicle):
When exiting and trying to lock the ve-
hicle, the message
Key Detected In
Vehicle appears in the multifunction
display. The vehicle will not be locked.
Factory setting
Global unlocking
̈ Pull an outside door handle.
ț All turn signal lamps flash once.
ț An acoustic signal sounds once.
ț The locking knobs in the doors
move up.
ț The anti-theft alarm system is dis-
armed.
The vehicle will lock again automatically
and rearm the anti-theft alarm system
within approximately 40 seconds if:
ț neither a door nor the trunk is opened
ț the central locking switch is not acti-
vated
Global locking
̈ Press lock button on an outside door
handle (
୴ page 62).
With the trunk and all doors closed:
ț All turn signal lamps flash three
times.
ț An acoustic signal sounds three
times.
ț The locking knobs in the doors
move down.
ț The anti-theft alarm system is
armed.
i When unlocking or locking the vehicle with
the SmartKey or with the KEYLESS-GO function
an acoustic signal sounds. The acoustic signal is
activated at the factory. If you wish to deactivate
the feature, or adjust its signal volume, contact
an authorized Mercedes-Benz Center.