Mercedes-Benz SLK-Class 2009 COMAND Manual - Manual (Page 63)

Compass Function
You can display a compass representation of
the current vehicle position and direction.
X Select Position£Compass
:
Current vehicle direction
;
Current height above sea level (rounded
to 100 ft)
=
Current vehicle position: longitude
?
Number of GPS satellites in use
A
Current vehicle position: latitude
B
Current steering angle of front wheels
i In order to display the height ; the
reception of at least four GPS satellites is
necessary.
X To exit the menu: Select Back
or
X press the k button
X
Destination Input
Introduction to Destination Input
G
Warning!
For safety reasons, only enter a new
destination when the vehicle is stationary.
i It is possible to enter a destination
regardless of whether route guidance is
active or inactive.
The following destination input options are
available:
R
Entering a destination via the address
(
Y page 61)
R
Entering a destination from the destination
memory (
Y page 69)
R
Entering a destination from the last
destinations (
Y page 70)
R
Entering a POI ( Y page 73)
R
Entering a destination via the map
(
Y page 70)
R
Entering a stopover destination
(
Y page 71)
R
Entering a destination via “Search & Send”
(
Y page 215)
Entering a Destination via the
Address
i In some countries it is not possible to
enter addresses at vehicle speeds above
apprx. 3 mph. The function becomes
available again as soon as the speed falls
below apprx. 2 mph.
i Set the system language .
The following options are available for
entering a destination via an address:
R
Entering state/province, city/zip code and
street
R
Entering state/province, city and city
center
R
Entering state/province, city/zip code and
street and house number
R
Entering state/province, city/zip code and
street and junction
Route calculation can then be started
(
Y page 68).
Destination Input
61
Navigation
Z