Block area, Navigation, Introduction – Mercedes-Benz E-Coupe 2010 COMAND Manual User Manual
Page 62
X
To set: Display menu system if applicable
X
Select
Navi£Highway Information.
Depending on the previous status, the
function will be switched offcor on Ç.
Example display: Function on
1
Available points of interest
2
Name of rest area or exit number
3
Distance from the current vehicle location
Read Traffic Messages Automatically
You can choose whether the traffic messages
relevant for the route are read automatically
or whether you have to start the reading
manually using the
Traffic submenu.
X
To set: Display menu system if applicable
X
Select
Navi£Read Traffic Messages
Automatically.
Depending on the previous status, the
function will be switched offcor on Ç.
Audio Fadeout
The Audio Fadeout function, if activated,
lowers the volume of the current audio source
when a navigation announcement is issued.
As soon as the navigation announcement has
ended, the audio source will be played with
the previous volume.
X
To activate: Display menu system if
X
Select
Navi£Audio Fadeout.
Depending on the previous status, the
function will be switched offcor on Ç.
Block Area
You can define an area within the map display
that is not to be used by the system in
calculating a route, if possible.
i
The calculated route may include a
blocked area if the destination is within a
blocked area or if the destination can only
be reached using roads that lead through a
blocked area. Highways cannot be blocked.
X
To set, change or delete: Display menu
X
Select
Navi £Block Area.
If no areas were previously set, the map
display appears ready to select an area. If
areas were previously set, the blocked area
list appears.
X
To set the map scale: Rotate
y
m
z
.
X
To scroll the map: Slide
q
m
r
,
o
m
p
or
w
m
x
.
X
To define the center of the block area:
Press n.
The blocked area appears in red.
60
Introduction
Navigation