Mercedes-Benz E-Coupe 2010 COMAND Manual - Manual (Page 159)

R
The discs must only be labelled using pens
specially designed for this purpose.
R
After use, replace the discs into the sleeve.
R
Protect the discs from heat and direct
sunlight.
DVD Playback Conditions
Some DVDs may not comply with the NTSC
or PAL TV playback standards. Sound, picture
and other playback problems may occur
when you play such DVDs.
As standard, COMAND can play video DVDs
which meet the following criteria:
R
Region code 1 or region code 0 (all regions)
i With a video DVD having another region
code, a corresponding message will be
displayed.
R
PAL or NTSC TV standard
Information on this can usually be found
either on the DVD itself or on the DVD sleeve.
i The factory setting for COMAND is region
code 1. An authorized Mercedes-Benz
Center can change this setting up to five
times. This will enable you to play video
DVDs with other region codes, provided
that they have been made to the PAL or
NTSC TV standard.
Functional Restrictions
It may be the case that some functions or
actions may not be possible at certain times,
or may not be possible in general, depending
on the DVD.
When you activate such functions or actions,
this is indicated by the 7 in the display.
Loading a DVD
X Proceed as described in the “Loading CDs
and DVDs” section (
Y page 134).
Ejecting a DVD
X Proceed as described in the “Ejecting CDs
and DVDs” section (
Y page 136).
Submenu Overview
DVD-Video
« /
X
± Media Sound
DVD functions « Pauses
playback ± Stops
playback Medium
selection Treble
Brightness X Resumes
playback
Bass
Contrast X Restarts
playback
Balance/Fader
Color Surround sound
16:9 Optimized
4:3
Widescreen
Submenu Overview
157
Video
Z