Mercedes-Benz E-Coupe 2010 COMAND Manual - Manual (Page 43)

Time
Setting the Time
i The correct time must be set for the
following functions to operate correctly:
R
Calculation of expected time of arrival
R
Time stamps for calls received and calls
dialed
X Press the W function button or select
System.
X Select Time £Set Time.
1 Sets the time
2 Current date
X To set value: Rotate y m z or slide q m r .
X To save setting: Press n.
i If you adjust the time in 30-minute
increments, the previously selected time
zone and automatic time-zone switching
between daylight saving time and standard
time settings are lost (
Y page 41).
i The increment for setting the minutes is
30 minutes due to GPS reception.
Setting the Time Format
X Select System£Time£Format.
The format list appears. The R dots show
the current settings.
i The abbreviations mean:
Time format: HH - Hour, MM - Minute for
either 24-hour clock or AM/PM format
X To change the format: Rotate y m z or
slide q m r .
X To confirm the change: Press n.
X To store the setting and exit the menu:
Slide o m p .
Setting the Time Zone and Switching
Between Daylight Saving Time and
Standard Time
i The correct time zone and daylight
saving/standard time must be set for the
following navigation system functions to
operate correctly:
R
Calculation of expected time of arrival
R
Time stamps for calls received and calls
dialed
X To set the time zone: Select System
£Time£Time Zone.
A time zone list appears. The R dot
indicates the current setting.
X Select the appropriate time zone.
X To switch between Daylight Saving and
standard time: Select Daylight Saving
Time (Summer) or Standard Time
(Winter).
The R dot indicates the current setting.
X To store setting and exit menu:
Slide o m p .
Display Settings
Setting the Brightness
i The brightness detected by the COMAND
light sensor affects the setting options for
this function.
X Select System£Settings£Display
£Brightness.
Display Settings
41
System Settings
Z