Mercedes-Benz E-Coupe 2010 COMAND Manual - Manual (Page 189)

your entry!. The voice control confirms
important commands to you and gives you
instructions in the event of incorrect entries.
Command Types
Voice control distinguishes between the
following types of command:
R
Global commands:
These are commands which can be called
up at any time (e.g. help, navigation or
phone commands).
R
Local commands:
These are commands which are only
available for the active application (e.g.
“Save”).
Active Application
The local commands refer to the application
currently shown on the display and to the
audio source you are currently listening to.
For example, if you are listening to the radio
while the navigation application is active on
the display, you can operate both
applications using voice control.
Operating Voice Control
1 Multifunction display
2 x Mute, X decreases the volume,
W increases the volume
3 ? Activates voice control
? % Cancels voice control
Starting the Dialog
X Switch on the ignition (see the vehicle
Operator's Manual).
i After the ignition has been switched on, it
takes about 30 seconds for the voice
control system to be ready for operation.
During this period the message
Loading
Speech Data is displayed.
X Press the ? button.
An acoustic signal confirms that the dialog
has been started.
X Give a command.
Interrupting the Dialog
If a list appears on the display, you can use
the “Pause” command to interrupt the dialog.
You can then select an entry using the
COMAND controller.
Overview
187
Voice Control
Z