beautypg.com

Changing a wheel and mounting the spare wheel, Breakdown assistance, Flat tire – Mercedes-Benz R-Class 2012 Owners Manual User Manual

Page 305

background image

X

Stop after driving for approximately ten
minutes and check the tire pressure with
the tire inflation compressor.

G

WARNING

If tire inflation pressure has fallen below
130 kPa (1.3 bar/26 psi) do not continue to
drive the vehicle.
Park your vehicle safely away from the
roadway and contact the nearest authorized
Mercedes-Benz Center or Roadside
Assistance.
Have the damaged tire replaced.

X

Correct the tire pressure if it is at least
130 kPa (1.3 bar/20 psi) (for the required
values, see the Tire and Loading
Information placard on the driver's side
B-pillar or the tire pressure table inside the
fuel filler flap).

X

To increase the tire pressure: switch on

the tire inflation compressor.

TIREFIT kit version 1

X

To reduce the tire pressure (version 1):

open pressure release screw F on
pressure gauge G.

TIREFIT kit version 2
E

Pressure release button

F

Pressure gauge

X

To reduce the tire pressure (version 2):

press pressure release button E on the
filler hose.

X

Stow the tire sealant bottle and the tire
inflation compressor.

X

Drive to the nearest workshop and have the
tire changed there.

X

Have the tire sealant bottle replaced as
soon as possible at a qualified specialist
workshop, e.g. at an authorized Mercedes-
Benz Center.

H

Environmental note

Have the used tire sealant bottle disposed of
professionally, e.g. at an authorized
Mercedes-Benz Center.

X

Have the tire sealant bottle replaced every
four years at a qualified specialist
workshop, e.g. an authorized Mercedes-
Benz Center.

Changing a wheel and mounting the

spare wheel

Preparing the vehicle

G

WARNING

The wheel and tire size of the emergency
spare wheel/spare wheel may differ to that of
the damaged wheel. When using an
emergency spare wheel/spare wheel the

Flat tire

303

Breakdown assistance

Z