beautypg.com

12 v sockets, Stowing and features, Features – Mercedes-Benz R-Class 2012 Owners Manual User Manual

Page 269

background image

If children open a door, they could injure other
persons or get out of the vehicle and injure
themselves or be injured by following traffic.
Do not expose the child restraint system to
direct sunlight. The child restraint system's
metal parts, for example, could become very
hot, and the child could be burned on these
parts.

G

WARNING

Never touch the heating element or sides of
the lighter; they are extremely hot. Hold the
knob only.
Make sure any children traveling with you do
not injure themselves or start a fire with the
hot cigarette lighter.

!

The 12 V socket in the cigarette lighter

can be used for accessories (up to a
maximum of 85 W) as long as they have the
standard socket type for cigarette lighters.
Note that the socket in the cigarette lighter
can be damaged when connecting
accessories, for example by frequent
insertion and removal or by sockets that do
not fit correctly. A damaged socket can
cause the cigarette lighter to stop working.

!

The cigarette lighter in the center console

in the front compartment is not intended
for operating the tire inflation compressor.

X

Turn the SmartKey to position

2 in the

ignition lock.

X

To open: open cover : (

Y

page 249).

X

Press in cigarette lighter ;.
Cigarette lighter ; will pop out
automatically when the heating element is
red-hot.

12 V sockets

Points to observe before use
!

The socket in the center console and the

socket in the cargo compartment are not
intended for operating the tire inflation
compressor.

The sockets can be used for accessories, e.
g. lamps or mobile phone chargers with a
maximum current draw of 240 W (20 A).
If you use the sockets for long periods when
the engine is switched off, the battery may
discharge.

X

Turn the SmartKey to position

2 in the

ignition lock.

i

You can also use the power sockets when

the SmartKey is in position

1 in the ignition

lock.
An emergency cut-out ensures that the on-
board voltage does not drop too low. If the
on-board voltage is too low, the power to
the sockets is automatically cut. This
ensures that there is sufficient power to
start the engine.

Features

267

Stowing and features

Z