beautypg.com

On-board comput er and display s, Displays and operation – Mercedes-Benz SLS-Class 2013 Owners Manual User Manual

Page 159

background image

X

Press the = or ; button on the

steering wheel to select the

Settings

Settings

menu.

X

Press the : or 9 button to select the

Factory Settings

Factory Settings

submenu.

X

Press a to confirm.

The

Reset All Settings?

Reset All Settings?

message

appears.

X

Press the : or 9 button to select

Yes

Yes

or

No

No

.

X

Press the a button to confirm the

selection.

If you have selected

Yes

Yes

, the multifunction

display shows a confirmation message.

AMG menu

AMG displays

X

Press = or ; on the steering wheel

to select the

AMG

AMG

menu.

:

Digital speedometer

;

Engine oil temperature

=

Coolant temperature

?

Transmission fluid temperature

If the engine oil temperature is below 80 †

or if the transmission fluid temperature is

below 60 †, the corresponding temperature

gauge flashes. Avoid driving at full engine

output during this time.
SETUP
SETUP displays the drive program, the AMG

adaptive sport suspension system setting

and the selected traction assist.

X

Press = or ; on the steering wheel

to select the

AMG

AMG

menu.

X

Press the 9 button repeatedly until

SETUP is displayed.

or

X

Press the AMG button on the center

console.

:

Drive program (C/S/S+/M)

;

ESP

®

mode (

ON

ON

/

Sport

Sport Handling

Handling Mode

Mode

/

OFF

OFF

)

=

AMG adaptive sport suspension system

setting (

COMFORT

COMFORT

/

SPORT

SPORT

/

SPORT +

SPORT +

)

RACETIMER
Displaying and starting RACETIMER

G

WARNING

The RACETIMER feature is only for use on

roads and in conditions where high speed

driving is permitted. Racing on public roads is

prohibited under all circumstances. The driver

is and must always remain responsible for

following posted speed limits.

You can use the RACETIMER to store lap

times.

X

Press = or ; on the steering wheel

to select the

AMG

AMG

menu.

X

Press the 9 button repeatedly until the

RACETIMER is shown.

i

If the RACETIMER is selected, the =

and ; buttons are inoperative.

Displays and operation

157

On-board

comput

er

and

display

s

Z