Mercedes-Benz SLS-Class 2013 Owners Manual - Manual (Page 156)

R the digital speedometer in the AMG AMG menu
R the navigation instructions in the Navi Navi
menu
R cruise control
X Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X Press the : or 9 button to select the
INST. CLUSTER INST. CLUSTER submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
function.
You will see the selected setting: km km or
miles miles .
X Press the a button to save the setting.
Permanent display for outside
temperature or additional speedometer
The
Permanent display: Outside Permanent display: Outside
Temperature/Speedometer Temperature/Speedometer allows you to
choose whether the multifunction display
shows the outside temperature or the speed
at the bottom right. The unit used in the
additional speedometer depends on the
display unit set (
Y
page 153).
X Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X Press the : or 9 button to select the
INST. CLUSTER INST. CLUSTER submenu.
X Press the a button to confirm.
X
Press the : or 9 button to select the
Permanent display Permanent display function.
You will see the selected setting [km/h] [km/h] or
Dig. speedom [mph] Dig. speedom [mph] or outside outside
temperature temperature .
X
Press the a button to save the setting.
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the Daytime Daytime Running Running
Lights Lights function and the light switch is in the
à or c position, the daytime running
lamps are switched on automatically when
the engine is running. If it is dark, the low-
beam headlamps switch on automatically.
In the dark, the following also light up:
R the low-beam headlamps
R the standing lamps
R the tail lamps
R the license plate lamp
R the side marker lamps
X
Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X Press the : or 9 button to select the
LIGHTS LIGHTS submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Daytime Running Lights Daytime Running Lights function.
You will see the selected setting: Enabled Enabled
or Disabled Disabled .
X Press the a button to save the setting.
Setting the brightness for the display and
switches
You can use the
Brightness display/ Brightness display/
switches switches function to set the brightness of
the multifunction display and the switches in
the vehicle.
X
Press the = or ; button on the
steering wheel to select the Settings Settings
menu.
X Press the : or 9 button to select the
Light Light submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Brightness Display/Switches: Brightness Display/Switches:
function.
You see the selected setting Level Level with a
value of between 0 and 100.
154
Displays and operation
On-
boa
rd
com
pu
te
ran
d
dis
pla
ys