Losi LOSB0235 Manual - Manual (Page 6)

Radio Replacement/Service
If you have a radio problem please call 1-877-504-0233 for customer service. Most likely, unless you have
gotten the components wet, the service technician can help you fix the problem over the phone. If the
problem is more severe, you may be asked to send in your vehicle and transmitter. In some cases, like
a broken servo or a speed control that has failed due to getting wet, your local dealer can sell you the
replacement component.
Replacing the Steering Servo
1. Remove lexan side plate by pulling on the sides to release the double sided tape. Most likely you will
have to replace the double sided tape to reinstall the lexan side plate.
2. Unplug all wires, remove receiver crystal and 4 screws pictured in Figure 1. (Be sure to note the
locations of all screws and sizes.)
3. Remove the 2 screws pictured in Figure 2. and place the PC board to the side.
4. Remove the 4 screws pictured in Figure 3. Remove the servo cover.
5. Slide the servo out from the chassis as shown in Figure 4.
6. Replace with new servo and be sure to place the tip of the servo saver into the slot of the
steering bell crank.
7. Reverse instruction order to complete servo installation.
Page 6
Figure 1 Figure 2
Figure 3 Figure 4