Losi LST XXL Getting Started Guide - Manual (Page 2)

Throttle
Steering
Throttle/Brake
Linkage
Steering
Throttle
Page 2
After filling the fuel bottle with fuel, lift the lid of the fuel tank and fill the tank (fig. 5A). Make sure you put the lid back on both
the fuel bottle and the jug of fuel. Press down on the primer button several times (fig. 5B) until you see the fuel move through
the fuel line to the carburetor. Do not pump the primer after the fuel reaches the carburetor or you will flood the engine and
make it difficult to start.
Turn on the transmitter and check for proper voltage. Slide the
switch on the side of the radio box to the “ON” position. With the
front tires off the ground, turn the steering wheel on the transmitter
from left to right (fig. 4A). The wheels should turn smoothly and with
ease (fig. 4B). Also operate the throttle and brake (fig. 4C), checking
for quick, smooth operation. Do not try to operate your truck if any
of the servos or any part of the radio is not operating correctly. If the
servos operate slowly, the batteries are low and must be recharged.
Never try to operate your model if either the transmitter or receiver
batteries are low.
Operations Check
4A
4B
4C
5A 5B
Fueling