Installation, 1 general, Installation - 3 – Kontron OM6062 User Manual
Page 41: 1 general - 3, Om6062r base solution configuration - 3, Om6062r installation
OM6062R
Installation
ID: 1031-6374, Rev. 1.0
Page 3 - 3
3.
Installation
3.1
General
The OM6062R shelf itself is an application support platform for MicroTCA™ solutions. In order
to satisfy solution requirements it must be configured accordingly. To assist application devel-
opers and system implementers in achieving their goals, the OM6062R is provided with a min-
imum configuration.
The following table and figures illustrate the base solution configuration of the OM6062R. This
configuration is the basis for the information and procedures provided in the following Installa-
tion sections.
Legend for Table 3-1:
FSA = front slot area, as seen from front - numbered left to right
u - l = upper - lower - area of slot occupied by component
QTY = quantity
Table 3-1: OM6062R Base Solution Configuration
COMPONENT
QTY
SYSTEM LOCATION - DESCRIPTION
Subrack
1
Mechanical chassis of OM6062R
Backplane
1
-
Power Supply Unit (PSU)
1
FSA-1 : u - l : Double 6HP, screw fixed
Fans
1
Fan bay area (four small sized fans)
Filler Panels, Single Width
(OPTIONAL)
-
FSA-2 : u - : Full-size with air flow guide and extraction handle
FSA-3 : u - : Mid-size with air flow guide and extraction handle
FSA-4 : u - : Mid-size with air flow guide and extraction handle
FSA-5 : u - : Mid-size with air flow guide and extraction handle
FSA-6 : u - : Mid-size with air flow guide and extraction handle
FSA-7 : u - : Mid-size with air flow guide and extraction handle
FSA-8 : u - : Mid-size with air flow guide and extraction handle
Filler Panels, Double Width
(OPTIONAL)
-
FSA-4 : u - l : Mid-size with side panel, air baffle, and screw retention device
FSA-5 : u - l : Mid-size with side panel, air baffle, and screw retention device
FSA-6 : u - l : Mid-size with side panel, air baffle, and screw retention device
FSA-7 : u - l : Mid-size with side panel, air baffle, and screw retention device
FSA-8 : u - l : Mid-size with side panel, air baffle, and screw retention device
Splitter Kit
(includes card guide
support plate, strut, and
card guide)
(OPTIONAL)
-
FSA-2 : u - l : Double, on right side of slot
FSA-3 : u - l : Double, on right side of slot
FSA-4 : u - l : Double, on right side of slot
FSA-5 : u - l : Double, on right side of slot
FSA-6 : u - l : Double, on right side of slot
FSA-7 : u - l : Double, on right side of slot
FSA-8 : u - l : Double, on right side of slot
AM5901 MCH
1
FSA-2 : u - l : Double Full-size (Kontron module)