Kontron CP305 - Manual (Page 31)

CP305 Introduction
ID 1035-7168, Rev. 2.0 Page 1 - 11
P R E L I M I N A R Y
In
terfaces
Mass Storage SATA: Integrated Serial ATA Host Controllers
• Two switchable SATA ports, either:
• One onboard SATA port and one SATA port on the CP305-HDD mod-
ule (8HP) for 2.5” HDD, or
• Two SATA ports available on Rear I/O
• Data transfer rate up to 1.5 Gbit/s
IDE Ultra ATA/100/66/33 and PIO
• CompactFlash (either on 4 HP or on 8HP)
• 40-pin, 2.54 mm, male pinrow connector available on CP305-HDD
module (8HP)
CompactFlash:
• CompactFlash socket for type I and type II CompactFlash cards
(DMA capable true IDE mode)
• The CompactFlash is always configured as IDE master
• Supports type I and II CompactFlash cards
40-pin Standard Connector (only with CP305-HDD module):
• If a CompactFlash card is inserted, the drive must be configured as
slave (CF is always IDE master).
I/O extension interfaces I/O extension interfaces:
• SATA
• 2x USB2.0
• SDVO
• LPC devices
• PS/2
• COM1
• Monitor and Control signals
Sockets
Front Panel Connectors • VGA: 15-pin D-Sub connector
• USB: two 4-pin connectors
• Ethernet: two RJ-45 connectors
Onboard Connectors • One 7-pin, L-form standard SATA connector
• I/O extension connectors
• CompactPCI Connector J1 and J2
• CompactFlash socket for type I, II (on the CP305-CF module)
Table 1-2: CP305 4HP Version Main Specifications (Continued)
CP305 SPECIFICATIONS