Kontron CP305 - Manual (Page 29)

CP305 Introduction
ID 1035-7168, Rev. 2.0 Page 1 - 9
P R E L I M I N A R Y
1.6 Technical Specification
Table 1-2: CP305 4HP Version Main Specifications
CP305 SPECIFICATIONS
P
rocessor and Memory
CPU The CP305 supports the following microprocessor:
• Intel® Atom™ Processor N270:
• 1.6 GHz core frequency
• 533 MHz FSB
• 437-pin µFCBGA8 package
• 56 kB L1 and 512 kB L2 cache on-die, running at CPU speed
Memory Main Memory:
• Up to 2 GB Single-Channel soldered DDR2 SDRAM memory
• 533 MHz memory bus
• Error Checking and Correction (ECC) not provided
Cache structure:
• 56 kB L1 on-die full speed processor cache
• 32 kB for instruction cache
• 24 kB for data cache
• 512 kB L2 on-die full speed processor cache
FLASH Memory:
• 1 MB FLASH for BIOS
Memory Extension:
• CompactFlash socket for type I and type II CompactFlash cards
(true IDE mode)
Serial EEPROM:
• 24LC64 (64 kbit)
Chi
pset
Intel® 945GSE Express
GMCH Mobile Intel® 945GSE Express Graphics Memory Controller Hub (945GSE
Express GMCH):
• Support for a single Intel® Atom™ Processor N270
• 64-bit AGTL/AGTL+ based System Bus interface with 533 MHz
• System Memory interface with optimized support for single-channel
DDR2 SDRAM memory at 533 MHz without ECC
• Integrated 2D and 3D Graphics Engines
• Integrated 400 MHz RAMDAC
Intel® ICH7-M 82801GM I/O Controller Hub (ICH7-M)
• PCI Rev. 2.3 compliant with support for 32-bit/33 MHz PCI operations
• Power management logic support
• Enhanced DMA controller, interrupt controller, and timer functions
• Integrated IDE controller Ultra ATA/100/66/33 and PIO mode
• USB 2.0 host interface with up to six USB ports available on the CP305
• SATA Host Controller with two ports, 1.5 Gbit/s transfer rate
• Two of the four x1 PCI Express ports are used for Gigabit Ethernet
• System Management Bus (SMBus) compatible with most I²C™ devices
• Low Pin Count (LPC) interface
• Firmware Hub (FWH) interface support