Kontron ETX-OH - Manual (Page 21)

ETX-OH / Specification
3.11.2 SATA
According the latest ETX® specification 3.0 the ETX®-OH provides two onboard SATA 3Gbps Ports with standard SATA pin-
out
SATA PIN Signal
1 Ground
2 Transmit+
3 Transmit-
4 Ground
5 Receive-
6 Receive+
7 Ground
3.11.3 USB
The ETX®-OH optionally supports two onboard USB 2.0 Mini-AB connectors J8 & J9. The Mini-AB USB On-The-Go (OTG)
allows additional Hi-Speed USB support for external devives.
3.11.4 DisplayPort
For external high-resolution displays the ETX®-OH supports an onboard connection for DisplayPort additionally to VGA
and LDVS. By default the module is equipped with the 22-pin FlatFoil solution for best compatibility to existing ETX®
carrier boards without having mechanical connectivity problems. The Flatfoil-to-DisplayPort cable KAB-ADAPT-FF-DP
allows connectivity of standard DisplayPort, HDMI, DVI, VGA or LVDS via the Kontron DisplayPort-to-LVDS Konverter:
Alternatively, a combination shape allows the usage of a standard DisplayPort connector (J15) instead of the 22-pin
Flatfoil directly on the module.
Please contact your local sales or support for customized variants with mini USB ports or
DisplayPort
3.11.5 CPU Debug & CPLD
The CPU Debug connector J10 and the CPLD programming interface J14 are for internal use only and should not be used.
21