Kontron ETX-OH - Manual (Page 13)

ETX-OH / Specification
3.4 Electrical Specification
3.4.1 Supply Voltage
Following supply voltage is specified at the ETX® connector:
Supply Voltage: 5V +/- 5%
5V_Stb: 5V DC +/- 5%
3.4.2 Power Supply Rise Time
» The input voltages shall rise from ≤10% of nominal to within the regulation ranges within 0.1ms to 20ms.
» There must be a smooth and continuous ramp of each DC input voltage from 10% to 90% of its final set-point
following the ATX specification
3.4.3 Supply Voltage Ripple
» Maximum 100 mV peak to peak 0 – 20 MHz
3.4.4 Power Consumption
The maximum Power Consumption of the different ETX®-OH modules is 9 - 19.4W (100% CPU load; 90°C CPU
temperature). Further details with measurements and TDP values of the single variants can be found in our
customer
section . Information there is available after registration.
13