Kontron COMe-mTT10 - Manual (Page 84)

COMe-mTT10 / BIOS Operation
North Bridge Chipset Configuration
Feature Options Description
IGD Mode Select Disabled
Enabled, 1MB
Enabled, 4MB
Enabled, 8MB
Enabled, 16MB
Enabled, 32MB
Enabled, 48MB
Enabled, 64MB
Select the amount of system memory used by the
Integrated Graphics Device
MSAC Mode Select Enabled, 512MB
Enabled, 256MB
Enabled, 128MB
Select the size of the graphics memory aperture and
untrusted space. Used by the Integrated Graphics
Device
Video Driver EMGD VBIOS
EMGD GOP
Select VBIOS if legacy support is required, GOP to speed
up POST
Flat Panel Type AUTO
LVDS 800×600 18Bit
AUTO configuration supports SDVO. If no monitor
attached, LVDS will be activated. Use VESA EDID to
auto-configure LVDS Panels
Panel Color Depth 18 Bit
24 Bit
For internal LVDS EDID detection, select the Panel Color
Depth
Backlight Control None/External
PWM
I2C
Backlight Control Setting
Backlight Value 128 Set LCD backlight brighness
Auto detection is only working with EDID panel data. Set Flat Panel Type to SVGA if your
panel is not detected automatically or when using a LVDStoDVI solution with DVI Monitor
resolution over 1280x768, 80MHz.
84