Kontron COMe-mTT10 - Manual (Page 40)

COMe-mTT10 / Features and Interfaces
4.17 SDIO
The SD card standard is a standard for removable memory storages designed and licensed by the SD Card Association
(
http://sdcard.org ). The card form factor, electrical interface, and protocol are all part of the SD Card specification. The
Intel® Platform Controller Hub EG20T supports 2 SDIO interfaces. On nanoETXexpress-TT the first interface SDIO#0 is
shared with the module GPIO signals. On modules without SATA SSD the second EG20T SDIO interface SDIO#1 is available
via onboard microSD connector.
The integrated SD Host Controller conforms to SD Host Controller Standard Specification Ver. 1.0.
Features:
» SDHC up to speed class 6
» SDIO Card Specification Ver. 1.10
» MMC System Specification Ver. 4.1
» SD bus transfer mode
» MMC transfer mode
SDIO interface on COM Express connector:
General purpose Input/output SD card interface signals
GPI0 SLOT0_DATA0
GPI1 SLOT0_DATA1
GPI2 SLOT0_DATA2
GPI3 SLOT0_DATA3
GPO0 SLOT0_CLK
GPO1 SLOT0_CMD
GPO2 SLOT0_WP
GPO3 SLOT0_CD#
40