Kontron COMe-mTT10 - Manual (Page 44)

COMe-mTT10 / System Resources
5.3 I/O Address Map
The I/O-port addresses of the are functionally identical to a standard PC/AT. All addresses not mentioned in this table
should be available. We recommend that you do not use I/O addresses below 0100h with additional hardware for
compatibility reasons, even if available.
I/O Address Used for Available Comment
0000 - 001F System Ressources No Fixed
0020 - 003F Interrupt Controller 1 No Fixed
0040 - 005F Timer, Counter No Fixed
0060 - 006F Keyboard controller No Fixed
0070 - 007F RTC and CMOS Registers No Fixed
0080 BIOS Postcode No Fixed
0084 - 008F DMA Page Register No Fixed
0090 - 009F System Control No Fixed
00A0 - 00BF Interrupt Controller No Fixed
00E0 - 00EF System Control No Fixed
00F0 - 00FF Math Coprocessor No Fixed
03B0 - 03DF VGA No Fixed
0400 - 043F Chipset No Fixed
0480 - 04BF Chipset No Fixed
04D0 - 04D1 Chipset No Fixed
0900 - 091F Power Management No Fixed
09C0 - 09FF GPE No Fixed
0A05 – 0A06 WB83627HG Hardware Monitor No Fixed if WB83627HG is in system
0A80 – 0A81 CPLD No Fixed
0CF8 - 0CFF PCI Configuration No Fixed
44