Kontron COMe Eval Carrier T10 - Manual (Page 52)

COM Express® Eval Type 10 / Compatibility Matrix
49
8 Compatibility Matrix
The COM Express® Eval Type 10 supports Computer-on-Modules following PICMG COM.0 Revision 1.0 pin-out Type 1 or
COM.0 revision 2.0 pin-out Type 10.
See table below wich features are supported by Kontron's COM Express® mini form factor modules:
Con Feature COMe-mSP1 COMe-mTT10 COMe-mCT10
J15 ATX 12V Power 4.75V - 14V 4.75V - 14V 4,75-14V
J25 PCIexpress Slot A if PCIe Switch is disabled if PCIe Switch is disabled if PCIe Switch is disabled
J26 PCIexpress Slot B if PCIe Switch is enabled if PCIe Switch is enabled if PCIe Switch is enabled
J27 PCIexpress Slot C if PCIe Switch is disabled if PCIe Switch is disabled if PCIe Switch is disabled
J41 ExpressCard YES, but USB#5 is USB 2.0 only YES YES
J38 PCI Slot0 if PCIe Switch is enabled YES if PCIe Switch is disabled
J39 PCI Slot 1 if PCIe Switch is enabled YES if PCIe Switch is enabled
J41 Express Card if PCIe Switch is enabled YES if PCIe Switch is disabled
J34 SATA1 on variants without onboard LAN YES YES
J61 USB #4 / USB #6
Ethernet RJ45 USB 2.0 only No USB #6 YES
J44 PWM FAN (SIO/Module) SIO YES / Modoule NO SIO YES / Module optional SIO YES / Module YES
J68 DVI-D (SDVO2DVI) Optional YES NO
J74 LPC FWH for external BIOS YES NO NO
J76 SPI Flash for external BIOS NO YES YES
J78 RS232 COMA from module NO YES Optional
J79 RS232 COMB from module NO YES Optional
J83 SER0 from module NO YES Optional
J84 SER1 from module NO YES Optional
J92 LID NO Optional YES
SW6 SLEEP NO Optional YES