Kontron COMe-bIP6 - Manual (Page 115)

COMe-bIP6 / BIOS Operation
SATA Configuration
Feature Options Description
SATA Controller(s) Enabled
Disabled
Enable/Disable SATA Device
SATA Mode Selection IDE
AHCI
RAID
Determines how SATA controller(s) operate
SATA Test mode Disabled
Enabled
Enable or disable Test Mode
OROM UI Delay 2 Seconds
4 Seconds
6 Seconds
8 Seconds
If enabled, indicates the delay of the OPROM UI Splash
Screen in a normal status
Aggressive LPM Support Disabled
Enabled Enable PCH to aggressively enter link power state
SATA Controller Speed Gem1
Gen2
Gen3
Indicates the maximum speed the SATA controller can
support
Alternate ID Enabled
Disabled Report alternate Device ID
Serial ATA Port 0/1/2/3 Configuration
Feature Options Description
PORT 0
PORT 1
PORT 2
PORT 3
Enabled
Disabled
Enable or Disable SATA Port
Hot Plug Disabled
Enabled
Designates this port as Hot Pluggable
External SATA Disabled
Enabled
Enable/Disable eSATA Support
SATA Device Type Hard Disk Drive
Solid State Drive
Identify the SATA port is connected to Solid State Driver
or Hard Disk Drive
Spin Up Device Disabled
Enabled
If enabled for any of the ports Staggered Spin Up will be
performed and only the drives which have this option
enabled will spin up at boot. Otherwise all drives spin
up at boot
115