Kontron MSM800XEL User Manual
Msm800xev/xel
This manual is related to the following products:
Table of contents
Document Outline
- 1 User Information
- 2 Introduction
- 3 Specifications
- 4 Quick Start Guide
- 5 Connectors & Jumpers
- 5.1 Connectors
- 5.1.1 Top Side of the MSM800XEV/XEL V1.2/1.1
- 5.1.2 Bottom Side of the MSM800XEV/XEL V1.2/1.1
- 5.1.3 X1 Power Supply
- 5.1.4 X10 VGA Monitor (CRT-signals)
- 5.1.5 X15 LCD TFT Interface (flat panel signals)
- 5.1.6 X29 Sound/Audio Port
- 5.1.7 X30 Printer Port (Centronics)
- 5.1.8 X31 Keyboard PS/2/-Mouse Utility Connector
- 5.1.9 X33 10/100 BASE-T Interface Connector
- 5.1.10 X38 Serial Port COM1
- 5.1.11 X39 Serial Port COM2
- 5.1.12 X44 IrDA Connector
- 5.1.13 X50 USB 1 Connector
- 5.1.14 X51 USB 2 Connector
- 5.1.15 X52 USB 3 Connector
- 5.1.16 X53 USB 4 Connector
- 5.1.17 X60 IDE Interface
- 5.1.18 X70 Floppy Disk Interface Connector
- 5.1.19 X101 PC/104+ BUS Interface
- 5.1.20 X102 PC/104 BUS Interface
- 5.1.21 X110 LPC-Port
- 5.1.22 X230 JTAG-Port
- 5.2 Jumpers
- 5.1 Connectors
- 6 Detailed System Description
- 6.1 Incompatibilities to a Standard PC/AT
- 6.2 Related Application Notes
- 6.3 High Frequency Radiation (to meet EN55022)
- 6.4 Battery Lifetime
- 6.5 Power Requirements
- 6.6 Boot Time
- 6.7 CPU, Boards and RAMs
- 6.8 Interfaces
- 6.9 Controllers
- 6.10 Timers and Counters
- 6.11 CMOS RAM Map
- 6.12 EEPROM saved CMOS Setup
- 6.13 Memory & I/O Map
- 7 System Resources
- 8 Design Considerations
- 8.1 Dimensions and Diagrams
- 8.1.1 MSM800XEV/XEL
- 8.1.2 Top of XEV board (XEL does not have a battery)
- 8.1.3 XEV board profile with CompactFlash (Option 807007) and battery (not on XEL)
- 8.1.4 3D perspective, top of XEV board (XEL does not have a battery)
- 8.1.5 3D perspective, bottom of XEV/XEL board with L+ (Option 807006)
- 8.1.6 Top of XEV board with small heat sink (Option 807041) and battery (not on XEL)
- 8.1.7 XEV board profile with small heat sink (Option 807041), CompactFlash (Option 807007) and battery (not on...
- 8.1.8 3D perspective, top of XEV board with small heat sink (Option 807041) and battery (not on XEL)
- 8.1.9 Top of XEV with large heat sink (Option 807042) and battery (not on XEL)
- 8.1.10 XEV board profile with large heat sink (Option 807042), CompactFlash (Option 807007) and battery (not o...
- 8.1.11 3D perspective, top of XEV with large heat sink (Option 807042) and battery (not on XEL)
- 8.1.12 Top of XEV board with thermojunction (Option 807043) and battery (not on XEL)
- 8.1.13 XEV board profile with thermojunction (Option 807043), CompactFlash (Option 807007) and battery (not on...
- 8.1.14 3D perspective, top of XEV with thermojunction (Option 807043) and battery (not on XEL)
- 8.1.15 MSM800LVDSCON
- 8.1.16 MSM800DVICON
- 8.1.17 MSM800CON
- 8.2 Assembly Views
- 8.3 Thermoscans
- 8.4 Thermal Specifications
- 8.1 Dimensions and Diagrams
- 9 BIOS
- 10 Previous Product Versions
- 11 Appendix A: Architecture Information
- 12 Appendix B: Document Revision History
- 13 Index